Touch panel for radio controller RGBW, 4-zone

A remote light control system consists of three essential components:
A touch panel is one of the two available control devices. The panel can be used to control 4 zones independent of each other. Many single controllers responsible for a single light point can be assigned to each zone.
The panel is powered by two AAA batteries (not included in a set).
On the panel we will find:
Zone coding
It is necessary to determine to which partition the controller is to be encoded. Then we disconnect the power supply of the controller for at least 10 seconds. After reconnecting the power supply the ON button of the selected zone should be pressed 3 times within 3 seconds. Correct pairing is signalled by the LED strip blinking 3 times.
To activate the night lighting function, that is, the maximum dimming of the LED strip, the OFF Master or OFF button of the selected zone should be held.
In order to turn on the white colour for the selected zone, the ON button of the selected zone should be held longer.
The panel is mounted by screwing/sticking the mounting plate to the selected surface. Then, the panel is inserted into the mounting plate.

• Communication range up to 30 m;
• Possibility to pair 4 controllers;
• Night lighting function;
• Predefined colour changing modes;
• Batteries are not included in a set.

Specifications: Producer: GTV Poland S.A., ul. Przejazdowa 21, 05-800 Pruszków, Poland, [email protected] +48 22 444 75 00 | CE certificate: yes | EAC certificate: yes | Protection class IP: 20 | Colour: white | Protection class against electric shock: III | Battery type: No batteries included