Furniture Lighting 12-24V

New

Adapter for remote control KONML (package of 5 pcs)

SKU: LD-KONML-AD

Adapter for remote control KONML (package of 5 pcs)

Wall mount for remote controls. It fits both Mono and RGBW remote controls.

New

Brackets for MINI surface-mounted profiles (set of 2 pcs)

SKU: PA-SPRGLAXM-00

Brackets for MINI surface-mounted profiles (set of 2 pcs)

A convenient solution that allows for simple and quick installation of LED profiles. Mounting the brackets does not require drilling holes in the profile, which simplifies and speeds up the entire installation process. These products are designed for use with GLAX mini surface-mounted profiles. The offered brackets are made of polycarbonate (PC), resistant to mechanical damage and high temperatures.

New

SKU: PA-ZAWGLAXDR-00

Cable for profiles 1,5 m

The cable with special mounts allows you to install the rod profile and the heatsink profile in a suspended way. One end is screwed to the ceiling, and the other is embedded in a special groove in the profile .

New

Cable lock M4 9×29 nickel-plated for pa-ZAWGLAXDR-00 pendant

SKU: PA-BLOKGLAXDR-00

Cable lock M4 9×29 nickel-plated for pa-ZAWGLAXDR-00 pendant

New

Cable with fixing ball in T-nipple length 1,5m, thickness 1,2mm for pa-ZAWGLAXDR-00 pendant

SKU: PA-LINGLAXDR-00

Cable with fixing ball in T-nipple length 1,5m, thickness 1,2mm for pa-ZAWGLAXDR-00 pendant

New

SKU: LD-ZTLS8MM-02N

Connector SLIM for LED strips 8 mm

The CX11 connector is the perfect solution that allows you to connect two sections of LED strips without the need for soldering, just put the ends of the tapes in the sockets and bruise the gusts. This fitting fits 8 mm wide belts.

New

Connector SLIM for LED strips 8 mm with cable 15 cm

SKU: LD-ZTKS8MM-02N

Connector SLIM for LED strips 8 mm with cable 15 cm

The CX11 connector is an ideal solution that allows you to connect two sections of LED strips in the corners of furniture furniture. This fitting fits 8 mm wide belts and is equipped with a 15 cm long cable. Importantly, this connector eliminates the need to solder wires.

New

Connector SLIM for LED strips 8 mm with cable 2 m

SKU: LD-ZTLS82M-2N

Connector SLIM for LED strips 8 mm with cable 2 m

The CX11 connector is the perfect solution for powering LED strips. This connector allows you to connect the LED strip without having to solder the wires. The 2 meter cable on one side has a connector to which the tape is plugged, on the other side there are isolated wires that can be easily connected to the power supply.

New

Connector SLIM for LED strips 8 mm with cable 2 m and mini AMP connector

SKU: LD-ZTLS8MMAMP-02N

Connector SLIM for LED strips 8 mm with cable 2 m and mini AMP connector

The CX11 connector is the perfect solution for powering LED strips. This connector allows you to connect the LED strip without having to solder the wires. The 2-meter cable on one side has a connector to which the tape is plugged, on the other side there is a mini AMP plug, which can be easily connected to the switch or power supply.

New

SKU: LD-KONML-WIFI

Controller WI-FI RGB, DC5V

A remote light control system consists of three essential components: A Wi-Fi controller makes it possible to control the lighting from the application installed on your smartphone. This gives almost unlimited freedom, because each controller (transmitting voltage to the LED strip) can work with 4 control devices, for example, a touch panel, remote control and application on the phone at the same time. To use the Wi-Fi controller, a free application should be downloaded (the download code is available on the product and in the manual) and a new account should be registered. Then, the controller should be connected to power supply using the included USB cable. The application will ask for Wi-Fi access (network name and password) and guide through the pairing process step by step.

New

SKU: PA-OSMLGLAXSO-00

Diffuser-lens, for profile GLAX RADIATOR, 2 m

The lens cover for LED profiles is an accessory that can be used to diffusion the light emitted by the LED strip. Such a cover allows you to narrow the angle of incidence of light to 60 °, which can be especially useful when we want to get a focused line of light.

New

SKU: PA-OSMLGLAXM-00

Diffuser, for profile GLAX MINI, milky, 2 m

Milky cover for LED profiles is an accessory that can be used to diffusion the light emitted by the LED strip. Such a cover allows for even diffusion of light, which can be especially useful when we want to get a soft, even light.

CART

Furniture Lighting 12-24V