Furniture Lighting 12-24V

New

IR motion sensor switch, max. 250 W, AC220-240V, IP20, 2 m

SKU: AE-WBEZDPIR-10

IR motion sensor switch, max. 250 W, AC220-240V, IP20, 2 m

A switch can be powered with a power of 110 - 240 V. At the output we get a uniform voltage of 220 - 240 V. The cross-section of the cables cannot exceed 0.75 mm2. The switch turns on the electric circuit when motion is detected. We can adjust the time of maintaining the light after the movement disappears with the knob placed in the body. This solution is perfect for lighting stairs.

New

Kit with RGB strip 5 m 150LED and controller IR24 and power supply 25 W, IP20

SKU: LD-ZL5RGB150-00

Kit with RGB strip 5 m 150LED and controller IR24 and power supply 25 W, IP20

The package includes a complete set consisting of a tape, power supply, controller and remote control. The tape has LEDs in three colors: red (Red), green (Green) and blue (Blue) – hence the abbreviation RGB. As a result of mixing three colors, we can obtain almost any derivative color along with white. Thanks to the included remote control, I can set the primary colors of the LEDs and their derivatives, we can also adjust the brightness of the tape. The remote control also has four buttons to activate functions:

New

SKU: PA-GLAXMNBJW3M19-AL

LED aluminum profile plinth narrow, studded GLAX silver PLATE 19mm L= 3007 mm

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Partition profiles belong to the group of studded profiles, i.e. those that are mounted by impaling them on a furniture board. That is why you should always choose the profile according to the thickness of the board. This profile is dedicated for a 19 mm thick board. The partition profile is used in wardrobes and dressing rooms. Its small size avoids collisions with shovels or pull-out hangers.

New

LED luminaire panel VEGAS 3W 100×100, alu, 2in1 warm-cold white, mini amp cable 2m

SKU: LD-VE15CBZB-53

LED luminaire panel VEGAS 3W 100×100, alu, 2in1 warm-cold white, mini amp cable 2m

VEGAS is a small fitting with a power of 3 W and brightness oscillating around 140 lumens, which blends discreetly into any interior. A milky cover effectively hides the visibility of the light points. The DUO-COLOR function allows for smooth change of the colour temperature from warm (3000 K) to cold (6400 K). It is recommended to use a wireless switch (AE-WDBP2CCT-10). The quick installation and simplicity of connection valued by users are the characteristic features of Vegas fitting. 4 screws, which are hidden under the aesthetic frame, are used for installation. The 2 meter power cable is terminated with a mini AMP connector, which is simply plugged into the switch.

New

LED luminaire panel VEGAS 3W 100×100, alu, warm white, cable mini amp 2m

SKU: LD-VE15CB-53

LED luminaire panel VEGAS 3W 100×100, alu, warm white, cable mini amp 2m

VEGAS is a small fitting with a power of 3 W and brightness oscillating around 140 lumens, which blends discreetly into any interior. A milky cover effectively hides the visibility of the light points. The quick installation and simplicity of connection valued by users are the characteristic features of Vegas fitting. 4 screws, which are hidden under the aesthetic frame, are used for installation. The 2 meter power cable is terminated with a mini AMP connector, which is simply plugged into the switch.

New

LED luminaire RADIUS, AC220-240V, 5 W, 2700K, IP44, chrome

SKU: LD-RA60CB-40N

LED luminaire RADIUS, AC220-240V, 5 W, 2700K, IP44, chrome

A bathroom fitting in a modern design is perfect for illuminating a mirror cabinet. 60 SMD 2835 LEDs that consume only 5W and produce light with a brightness of 220 lumens are the light sources in the fitting. The wide light distribution angle makes it possible to effectively illuminate the selected space. IP 44 ensures safe use in high humidity conditions. Radius II is powered by a standard voltage of 220-240 V. The luminaire is equipped with a 30 cm power cable (2-wire) for connecting the fitting to the power. The fitting is mounted to the upper rim with two screws.

New

LED luminaire RADIUS, AC220-240V, 5 W, 6500K, IP44, chrome

SKU: LD-RA60ZB-40N

LED luminaire RADIUS, AC220-240V, 5 W, 6500K, IP44, chrome

New

SKU: LD-VA24CB-53BL

LED luminaire silver with distance Vasco, 12V DC, 1.7W, 24 SMD3528, warm white, trans. 2m WITHOUT LOGO

New

LED luminaire TREVI, AC220-240V, 4 W, 3000K, cable 15 cm

SKU: LD-TR24CB-53

LED luminaire TREVI, AC220-240V, 4 W, 3000K, cable 15 cm

LED fittings are an integral part of furniture lighting. It is used in a very wide spectrum: kitchens, wardrobes and even shelves. The fitting is powered by a standard mains voltage of 220-240 V, so it should be remembered to choose the right LED driver and a switch. The increased degree of splash-resistance of IP44 allows for installation of the fitting for example above a sink. Trevi consumes 4 W while emitting light with a brightness of 300 lm. The beam angle is 120°. The luminaire is terminated with a 1.5 meter cable without mini AMP connectors. The fitting is recessed mounted. The mounting hole should be 56 mm in diameter.

New

LED luminaire TREVI, AC220-240V, 4 W, 4000K, cable 15 cm

SKU: LD-TR24NE-53

LED luminaire TREVI, AC220-240V, 4 W, 4000K, cable 15 cm

New

LED luminaire TREVI, AC220-240V, 4 W, 6400K, cable 15 cm

SKU: LD-TR24ZB-53

LED luminaire TREVI, AC220-240V, 4 W, 6400K, cable 15 cm

New

SKU: PA-GLAXMNBDW3M19-AL

LED partition aluminum profile narrow, studded GLAX silver PLATE 19mm L= 3007 mm

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Partition profiles belong to the group of studded profiles, i.e. those that are mounted by impaling them on a furniture board. That is why you should always choose the profile according to the thickness of the board. This profile is dedicated for a 19 mm thick board. Double-sided partition profile is used in wardrobes and dressing rooms. Its small size avoids collisions with shovels or pull-out hangers.

CART