Radio controller RGBW for LED strip RGBW, DC12-24V, max. 120-240 W, 1-zone

A remote light control system consists of three essential components:
A single controller is one zone (up to 4 controllers can be paired in the control device), to which both RGB and RGBW LED strips can be connected.
Connecting the components to the controller is very simple. On one side, the cables from the LED driver (12/24 V) are connected. These must be cables with uninsulated ends. On the other side, there is a place to insert cables from the light source. Cables with uninsulated ends are also inserted here, remembering about the correct polarity.
After tightening all the terminals, the controller is ready to be paired with the control device.
The maximum load of the controller is:

• It can work with 12 and 24 V power supply;
• Communication range with the controller up to 30 m;
• Possibility to connect both RGB and RGBW LED strips.

Specifications: Power of light source or device [W]: 12V – 120W, 24V – 240W | Producer: GTV Poland S.A., ul. Przejazdowa 21, 05-800 Pruszków, Poland, [email protected] +48 22 444 75 00 | CE certificate: yes | EAC certificate: yes | Protection class IP: 20 | Protection class against electric shock: III | Colour: white