Profile GLAX RADIATOR for LED strip, 2 m

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center.
The profile with heatsink is able to effectively absorb the heat generated by very high power tapes, consuming up to 30 W / 1m.
Using the lens cover, we have the ability to narrow the angle of light scattering to 60 °.
Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.
Specially designed design allows you to hang the profile on cables. Dedicated links are 150 cm long.

• Effectively dissipates the heat generated by the LED strip;
• Dedicated milk casing PA-OSMLGLAX-00;
• Dedicated transparent casing PA-OSTRGLAX-00;
• Dedicated lens cover: PA-OSMLGLAXSO-00;
• Dedicated cap PA-ZASGLAXRAD-00;
• Mounting bracket PA-SPRGLAXM-00;
• Suspension rope (1) PA-ZAWGLAXDR-00;
• The maximum width of the LED strip is 12 mm.

Specifications: Application: Kitchen, Living Room, Bedroom, Dressing Room, Hall, Office, Shop, | Producer: GTV Poland S.A., ul. Przejazdowa 21, 05-800 Pruszków, Poland, [email protected] +48 22 444 75 00 | Material: aluminium/cast iron