0
Language English
Sign In Account
0
€0,00 Total

Your cart is empty

TOTAL€0,00
Home / Shop / Lighting / Furniture Lighting 12-24V / GLAX Profiles / Angle profiles

Angle profiles

Subcategories

GLAX surface mounted angle profile
New
Plug for corner surface-mounted profile GLAX (with triangular diffuser) left 5pcs.+right, (set of 10 pcs.), grayWishlist
SKU: PA-ZASGLAXNKKTT-00

Plug for corner surface-mounted profile GLAX (with triangular diffuser) left 5pcs.+right, (set of 10 pcs.), gray

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Plug for corner surface-mounted profile GLAX, left 5pcs.+right, (set of 10 pcs.), champagneWishlist
SKU: PA-ZASGLAXNKKT-90

Plug for corner surface-mounted profile GLAX, left 5pcs.+right, (set of 10 pcs.), champagne

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Plug for corner surface-mounted profile GLAX, left 5pcs.+right, (set of 10 pcs.), grayWishlist
SKU: PA-ZASGLAXNKKT-00

Plug for corner surface-mounted profile GLAX, left 5pcs.+right, (set of 10 pcs.), gray

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Profile GLAX for LED strip, corner surface-mounted, 2 m, blackWishlist
SKU: PA-GLAXNKKT-AL-20M

Profile GLAX for LED strip, corner surface-mounted, 2 m, black

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The angular profile is used in the corners of furniture development, most often under hanging cabinets in the kitchen and under the shelves in the dressing room. In the case of an angular profile, special mounting brackets are used, having small, curved to the center plates that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.
Add to Cart
New
Profile GLAX for LED strip, corner surface-mounted, 2 m, champagneWishlist
SKU: PA-GLAXNKKT-AL-90

Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The angular profile is used in the corners of furniture development, most often under hanging cabinets in the kitchen and under the shelves in the dressing room. In the case of an angular profile, special mounting brackets are used, having small, curved to the center plates that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.
Add to Cart
New
Profile GLAX for LED strip, corner surface-mounted, 2 m, whiteWishlist
SKU: PA-GLAXNKKT-AL-10

Profile GLAX for LED strip, corner surface-mounted, 2 m, white

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The angular profile is used in the corners of furniture development, most often under hanging cabinets in the kitchen and under the shelves in the dressing room. In the case of an angular profile, special mounting brackets are used, having small, curved to the center plates that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.
Add to Cart
Show more

Branding & Development by: Voolar

© 2026 My Great Blog. All rights reserved.