0
Language English
Sign In Account
0
€0,00 Total

Your cart is empty

TOTAL€0,00
Home / Shop / Lighting / Furniture Lighting 12-24V / GLAX Profiles / Mortise profiles

Mortise profiles

Subcategories

GLAX profile recessed, micro

GLAX recessed profile with flange

GLAX recessed profile, high with flange
New
Plug for profile LED GLAX MINI high, (set of 10 pcs.), grayWishlist
SKU: PA-ZASGLAXMWK-00

Plug for profile LED GLAX MINI high, (set of 10 pcs.), gray

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Plug for profile PA-GLAX-AL, (set of 10 pcs.), blackWishlist
SKU: PA-ZASGLAX-20M

Plug for profile PA-GLAX-AL, (set of 10 pcs.), black

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Plug for profile PA-GLAX-AL, (set of 10 pcs.), champagneWishlist
SKU: PA-ZASGLAX-90

Plug for profile PA-GLAX-AL, (set of 10 pcs.), champagne

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Plug for profile PA-GLAX-AL, (set of 10 pcs.), whiteWishlist
SKU: PA-ZASGLAX-10

Plug for profile PA-GLAX-AL, (set of 10 pcs.), white

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.
Add to Cart
New
Profile GLAX for LED strip, recessed, 2 m, blackWishlist
SKU: PA-GLAX-AL-20M

Profile GLAX for LED strip, recessed, 2 m, black

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. For proper assembly, milling with a width of 15 mm and a depth of at least 5 mm should be made. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX for LED strip, recessed, 2 m, champagneWishlist
SKU: PA-GLAX-AL-90

Profile GLAX for LED strip, recessed, 2 m, champagne

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. For proper assembly, milling with a width of 15 mm and a depth of at least 5 mm should be made. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX for LED strip, recessed, 2 m, whiteWishlist
SKU: PA-GLAX-AL-10

Profile GLAX for LED strip, recessed, 2 m, white

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. For proper assembly, milling with a width of 15 mm and a depth of at least 5 mm should be made. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX MICRO for LED strip, recessed, 2 mWishlist
SKU: PA-GLAXMIC-AL

Profile GLAX MICRO for LED strip, recessed, 2 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. The micro recessed profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. For proper assembly, milling with a width of 12 mm and a depth of at least 10.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX MICRO for LED strip, recessed, 3 mWishlist
SKU: PA-GLAXMIC3M-AL

Profile GLAX MICRO for LED strip, recessed, 3 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. The micro recessed profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. For proper assembly, milling with a width of 12 mm and a depth of at least 10.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX MINI high for LED strip, recessed, 2 m, blackWishlist
SKU: PA-GLAXMW-AL-20M

Profile GLAX MINI high for LED strip, recessed, 2 m, black

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs. For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX MINI high for LED strip, recessed, 2 m, champagneWishlist
SKU: PA-GLAXMW-AL-90

Profile GLAX MINI high for LED strip, recessed, 2 m, champagne

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs. For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
New
Profile GLAX MINI high for LED strip, recessed, 2 m, whiteWishlist
SKU: PA-GLAXMW-AL-10

Profile GLAX MINI high for LED strip, recessed, 2 m, white

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs. For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.
Add to Cart
12
Show more

Branding & Development by: Voolar

© 2026 My Great Blog. All rights reserved.