Top-mounted profiles

New

SKU: PA-GLAXMNK-AL-10

Profile GLAX MINI for LED strip, surface-mounted, 2 m, white

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini profile is characterized by a small cross-section of 14x7 mm. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNK3M-AL-20M

Profile GLAX MINI for LED strip, surface-mounted, 3 m, black

New

SKU: PA-GLAXMNK3M-AL-10

Profile GLAX MINI for LED strip, surface-mounted, 3 m, white

New

SKU: PA-GLAXMNKW-AL-20M

Profile GLAX MINI high for LED strip, surface-mounted, 2 m, black

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini, high profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNKW-AL-90

Profile GLAX MINI high for LED strip, surface-mounted, 2 m, champagne

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini, high profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNKW-AL-10

Profile GLAX MINI high for LED strip, surface-mounted, 2 m, white

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini, high profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXRAD-AL

Profile GLAX RADIATOR for LED strip, 2 m

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The profile with heatsink is able to effectively absorb the heat generated by very high power tapes, consuming up to 30 W / 1m. Using the lens cover, we have the ability to narrow the angle of light scattering to 60 °. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. Specially designed design allows you to hang the profile on cables. Dedicated links are 150 cm long.

New

SKU: PA-ZASGLAXMNKO-00

Round plug for surface-mounted profile GLAX MINI, (set of 10 pcs.), gray

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.

New

SKU: PA-ZASGLAXMNKK-00

CART