A switch can be powered with a power of 110 - 240 V. At the output we get a uniform voltage of 220 - 240 V. The cross-section of the cables cannot exceed 0.75 mm2.
The switch turns on the electric circuit when motion is detected. We can adjust the time of maintaining the light after the movement disappears with the knob placed in the body.
This solution is perfect for lighting stairs.
The switch is equipped with two small motion sensors that react to changes of temperature against the environment. Their detection range is approximately 2 meters. Due to their character, they should be installed inside cabinets. After opening, for example, the wardrobe door, the sensor detects the human body warmer than the environment and turns on the light.
The runtime of light after the object leaves „the field of view” of the sensor is about 45 seconds.
If you do not need both sensors, you can easily disconnect one by unfastening the miniAMP connector.
Non-contact switch for mounting inside the profile. The switch is equipped with a 2-meter long power cord. Supports tape sections with a power of no more than 60W. It does not have a dimming function. Readiness for work is indicated by a blue LED. It also makes it easier to find the switch at night. Do not connect the switch under voltage. The first start should take place with the casing attached.
