Lighting

New

SKU: PA-ZASGLAXMNKW-10

Plug for profile PA-GLAXMNKW-AL, (set of 10 pcs.), white

The end end cap for LED profiles is an accessory that is used to protect the ends of the LED profiles and at the same time prevent dirt and insects from getting inside the profile. The end end plugs are made of ABS plastic, which ensures durability and resistance to mechanical damage. The end end cap for LED profiles is very important because it not only protects the ends of the profiles, but also helps to maintain the aesthetics of the entire LED installation. Thanks to the use of end plugs, the installation looks more neat and professional. It is also important that the end caps are well matched to the LED profile, which will avoid possible light clearances.

New

Power supply PRO, DC12V, input AC220-240V, 33 W, IP20

SKU: LD-ZASPRO33W-30

Power supply PRO, DC12V, input AC220-240V, 33 W, IP20

A LED driver reduces the input voltage of 220-230 V to 12 V. Thanks to this, it can be used to power most LED strips for furniture fittings. The LED driver from GTV has short-circuit and overload protection, which increases the safety of its use. A built-in EMC filter that eliminates annoying squealing is characteristic feature of the PRO series LED drivers from GTV. The overload protection is set at such a level that in an emergency the LED driver will turn off and not burn out. The maximum operating temperature for PRO LED drivers is 80°C. Thanks to this, they can be put on furniture and wood-based materials.

New

SKU: PA-GLAXNKKT-AL-20M

Profile GLAX for LED strip, corner surface-mounted, 2 m, black

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The angular profile is used in the corners of furniture development, most often under hanging cabinets in the kitchen and under the shelves in the dressing room. In the case of an angular profile, special mounting brackets are used, having small, curved to the center plates that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm.

New

SKU: PA-GLAXNKKT-AL-90

Profile GLAX for LED strip, corner surface-mounted, 2 m, champagne

New

SKU: PA-GLAXNKKT-AL-10

Profile GLAX for LED strip, corner surface-mounted, 2 m, white

New

SKU: PA-GLAXWN19-AL

Profile GLAX for LED strip, end, for plate 19 mm, 2 m

A smooth cabinet line can be achieved by mounting a GLAX crown profile to the bottom edge. It is a two-in-one product that replaces the handle and illuminates the countertop at the same time.

New

SKU: PA-GLAX-AL-20M

Profile GLAX for LED strip, recessed, 2 m, black

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. For proper assembly, milling with a width of 15 mm and a depth of at least 5 mm should be made. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAX-AL-90

Profile GLAX for LED strip, recessed, 2 m, champagne

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. For proper assembly, milling with a width of 15 mm and a depth of at least 5 mm should be made. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAX-AL-10

Profile GLAX for LED strip, recessed, 2 m, white

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. For proper assembly, milling with a width of 15 mm and a depth of at least 5 mm should be made. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAXMIC-AL

Profile GLAX MICRO for LED strip, recessed, 2 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. The micro recessed profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. For proper assembly, milling with a width of 12 mm and a depth of at least 10.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAXMIC3M-AL

Profile GLAX MICRO for LED strip, recessed, 3 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. The micro recessed profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. For proper assembly, milling with a width of 12 mm and a depth of at least 10.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAXMICNK-AL

Profile GLAX MICRO for LED strip, surface-mounted, 2 m

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The micro profile allows you to get a narrow line of light without visible light points. The micro profile is dedicated to narrow, 5 mm LED strips.

CART

Lighting

Subcategories

LED Strips

Recessed Spots

Electrical Accessories

Furniture Lighting 12-24V

Furniture Outlets and Chargers

Industrial Lighting

Light Sources

Lighting for the Office and Home

Outdoor Lighting

Track Systems