The TERNO emergency luminaire is a modern LED device designed for use in emergency and evacuation lighting systems. Made of durable materials, the luminaire is surface-mounted, making it easy to install in a variety of locations.
This luminaire is ideal for determining escape routes in public places, offices, schools or industrial spaces. Thanks to the illuminated evacuation sign, it effectively indicates exit routes in an emergency.
Operating modes:
Clear
: The luminaire is continuously powered and illuminates both during and after a normal power supply.
Dark
: The luminaire only lights up if the primary power supply fails, which is an energy-saving solution.
Switchable mode
: The luminaire's illumination during the presence of the primary power supply can be controlled by an external switch, which gives the user full control over the operation of the device.
The TERNO luminaire is equipped with a TEST button, which allows you to easily check the correct operation of the device, which is crucial for the safety of users.
The TERNO emergency luminaire is a modern LED device designed for use in emergency and evacuation lighting systems. Made of durable materials, the luminaire is surface-mounted, making it easy to install in a variety of locations.
This luminaire is ideal for determining escape routes in public places, offices, schools or industrial spaces. Thanks to the illuminated evacuation sign, it effectively indicates exit routes in an emergency.
Operating modes:
Clear
: The luminaire is continuously powered and illuminates both during and after a normal power supply.
Dark
: The luminaire only lights up if the primary power supply fails, which is an energy-saving solution.
Switchable mode
: The luminaire's illumination during the presence of the primary power supply can be controlled by an external switch, which gives the user full control over the operation of the device.
The TERNO luminaire is equipped with a TEST button, which allows you to easily check the correct operation of the device, which is crucial for the safety of users.
The module is ideal for places that require continuous lighting, such as hospitals, warehouses, offices, and other commercial and residential spaces where safety and continuity of light are a priority.
Operating modes:
'Bright' Mode:
Provides continuous illumination that functions both at normal power and when it is lost.
'Dark' Mode:
The panel only lights up in the event of a power outage, which is ideal for occasional use.
Switchable Mode:
The lighting of the panel can be controlled by an external switch, allowing for flexible lighting management.
Installation and Operation:
Tiago luminaires are made of aluminium alloy and tempered glass, thanks to which they have high durability and provide optimal lighting, among others, driveways, front doors, stairs, terraces or walls around the property.
Fixtures can work in conditions of high humidity and dustiness - IP54.
The luminaire has two built-in GU10 sockets, the maximum power of light sources that can be used is 2x35W. The fixture emits light in two directions (up and down).
Tiago luminaires are made of aluminium alloy and tempered glass, thanks to which they have high durability and provide optimal lighting, among others, driveways, front doors, stairs, terraces or walls around the property. Fixtures can work in conditions of high humidity and dustiness - IP54.
The luminaire has a built-in GU10 socket, the maximum power of the light source that can be used is 35W. The fixture emits light in one direction.
The classic design of the luminaire brings the memories of long summer evenings with family and friends in garden gazebos or on terraces.
Ventana can be fitted with E27 bulbs of up to 20 watts. When combined with decorative filament bulbs from the Vintage series, it also provides additional decoration during the day.
The current trend is to move away from light points in favour of linear lighting, which is based on LED strips.
LED strips are popular due to their low price and proven quality. Of course, their reliability largely depends on carefully carried out installation.
During operation, the strip generates heat that must be dissipated from it. Otherwise, the strip may wear out prematurely. Special GLAX aluminium profiles are used to dissipate heat from the strip. In order to effectively dissipate heat from the strip to the aluminium profile, the strip must adhere to it with its entire surface. Therefore, before gluing the LED strip into the GLAX profile, its centre should be degreased.
LED strips find a wide range of applications both in homes and office spaces. They can be used to illuminate the kitchen, wardrobe, reception, showcases and even walls and ceilings.
2835 LED strip with its entire length, i.e. 5 m, consumes 33 W, while 1 meter consumes only 11 W. The strip can be cut every 5 cm, remembering to make the cut in a specially marked place.
An important parameter of LED strips is the density of LEDs arrangement. The more densely they are arranged, the more even line of light will be obtained. In this case, 300 LEDs are arranged along the entire length of the strip, i.e. 60/m.
Attention should also be paid to the width of the LED strip so that it can be easily glued it into the profile. This index is 8mm wide.
The current trend is to move away from light points in favour of linear lighting, which is based on LED strips.
LED strips are popular due to their low price and proven quality. Of course, their reliability largely depends on carefully carried out installation.
During operation, the strip generates heat that must be dissipated from it. Otherwise, the strip may wear out prematurely. Special GLAX aluminium profiles are used to dissipate heat from the strip. In order to effectively dissipate heat from the strip to the aluminium profile, the strip must adhere to it with its entire surface. Therefore, before gluing the LED strip into the GLAX profile, its centre should be degreased.
LED strips find a wide range of applications both in homes and office spaces. They can be used to illuminate the kitchen, wardrobe, reception, showcases and even walls and ceilings.
2835 LED strip with its entire length, i.e. 5 m, consumes 60 W, while 1 meter consumes only 19 W. The strip can be cut every 2,5 cm, remembering to make the cut in a specially marked place.
An important parameter of LED strips is the density of LEDs arrangement. The more densely they are arranged, the more even line of light will be obtained. In this case, 600 LEDs are arranged along the entire length of the strip, i.e. 120/m.
Attention should also be paid to the width of the LED strip so that it can be easily glued it into the profile. This index is 10 mm wide.
The current trend is to move away from light points in favour of linear lighting, which is based on LED strips.
LED strips are popular due to their low price and proven quality. Of course, their reliability largely depends on carefully carried out installation.
During operation, the strip generates heat that must be dissipated from it. Otherwise, the strip may wear out prematurely. Special GLAX aluminium profiles are used to dissipate heat from the strip. In order to effectively dissipate heat from the strip to the aluminium profile, the strip must adhere to it with its entire surface. Therefore, before gluing the LED strip into the GLAX profile, its centre should be degreased.
LED strips find a wide range of applications both in homes and office spaces. They can be used to illuminate the kitchen, wardrobe, reception, showcases and even walls and ceilings.
3528 LED strip with its entire length, i.e. 5 m, consumes 17 W, while 1 meter consumes only 4,8 W. The strip can be cut every 5 cm, remembering to make the cut in a specially marked place.
An important parameter of LED strips is the density of LEDs arrangement. The more densely they are arranged, the more even line of light will be obtained. In this case, 300 LEDs are arranged along the entire length of the strip, i.e. 60/m.
Attention should also be paid to the width of the LED strip so that it can be easily glued it into the profile. This index is 8 mm wide.
