Furniture Lighting 12-24V

New

SKU: PA-GLAXMIC-AL

Profile GLAX MICRO for LED strip, recessed, 2 m

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, e.g. with a drawer or drawer front. The micro recessed profile allows you to get an even line of light without visible light points even when using a tape with a not very dense arrangement of LEDs. For proper assembly, milling with a width of 12 mm and a depth of at least 10.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAXMIC3M-AL

Profile GLAX MICRO for LED strip, recessed, 3 m

New

SKU: PA-GLAXMICNK-AL

Profile GLAX MICRO for LED strip, surface-mounted, 2 m

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The micro profile allows you to get a narrow line of light without visible light points. The micro profile is dedicated to narrow, 5 mm LED strips.

New

SKU: PA-GLAXMICNK3M-AL

Profile GLAX MICRO for LED strip, surface-mounted, 3 m

New

SKU: PA-GLAXMNK-AL-20M

Profile GLAX MINI for LED strip, surface-mounted, 2 m, black

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini profile is characterized by a small cross-section of 14x7 mm. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNK-AL-90

Profile GLAX MINI for LED strip, surface-mounted, 2 m, champagne

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini profile is characterized by a small cross-section of 14x7 mm. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNK-AL-10

Profile GLAX MINI for LED strip, surface-mounted, 2 m, white

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini profile is characterized by a small cross-section of 14x7 mm. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNK3M-AL-20M

Profile GLAX MINI for LED strip, surface-mounted, 3 m, black

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini profile is characterized by a small cross-section of 14x7 mm. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMNK3M-AL-10

Profile GLAX MINI for LED strip, surface-mounted, 3 m, white

During operation, the LED strip generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. Applied profiles are very often chosen by customers due to the very simple assembly. In the case of the micro profile, special mounting brackets are used, having small, curved blades that hold the profile in place. It is recommended that the distance between the grips is not more than 1 meter. The mounting brackets are screwed to the selected surface with screw Ø 3 with a conical head. It is very important that the diameter of the screw head does not exceed 6 mm. The mini profile is characterized by a small cross-section of 14x7 mm. The maximum width of the LED strip is 10 mm.

New

SKU: PA-GLAXMW-AL-20M

Profile GLAX MINI high for LED strip, recessed, 2 m, black

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs. For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAXMW-AL-90

Profile GLAX MINI high for LED strip, recessed, 2 m, champagne

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs. For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

New

SKU: PA-GLAXMW-AL-10

Profile GLAX MINI high for LED strip, recessed, 2 m, white

The current trend is to move away from light points in favor of linear lighting, based on LED strips. During operation, the belt generates heat that must be dissipated from it. Otherwise, the tape may wear out prematurely. Special aluminium GLAX profiles are used to dissipate heat from the belt. In order to effectively dissipate heat from the tape to the aluminum profile, the tape must adhere to it with its entire surface. Therefore, before pasting the LED strip into the GLAX profile, it is necessary to degrease its center. The mini mortise profile is used wherever we want to obtain a smooth surface, so that the profile does not collide, for example, with a drawer or the front of the drawer. The use of a high profile reduces the visibility of light points, even when using a strip with a low density of LEDs. For proper assembly, milling with a width of 15 mm and a depth of at least 12.5 mm should be performed. Special teeth will press against the edge of the plate. The ends of the profile are closed with the help of aesthetic plugs. Do not use mounting adhesives or silicones for installation.

CART