Cutlery Drawer Insert COMFORT

The POLI COMFORT cutlery drawer insert provides a practical way to organise kitchen drawers and keep cutlery and kitchen utensils easily accessible. Its wide, simply shaped compartments accommodate cutlery, serving utensils and smaller kitchen accessories of different sizes.

The insert is designed for drawers with a depth of 490 mm. Versions are available for kitchen cabinets with nominal widths ranging from 300 to 1200 mm. The actual width of the insert depends on the selected cabinet width.

Recesses between the compartments make cutlery easier to pick up and remove. A trimming allowance around the outer edges makes it possible to adapt the insert to the exact internal dimensions of the drawer.

The COMFORT drawer insert is made of moulded plastic and is available in four finishes:

• white, 1.6 mm thick;
• metallic, 1.6 mm thick;
• anthracite matt, 2.0 mm thick;
• black matt, 2.0 mm thick.

Not every finish is available in every size. To select the correct product, first choose the nominal cabinet width and then select one of the finishes available for that size.

Product benefits

• Practical organisation for cutlery and kitchen utensils
• Designed for kitchen drawers with a depth of 490 mm
• Available for several nominal cabinet widths
• Wide and practical compartments
• Recesses make cutlery easier to pick up
• Trimming allowance for adapting the insert to the drawer
• Four colour and thickness options
• Easy-to-clean moulded surface

Choosing the correct size

Select the product according to the nominal width of the kitchen cabinet. For example, the drawer insert intended for a 600 mm cabinet has actual dimensions of 535 × 490 mm.

Always measure the internal width and depth of the drawer before ordering. The nominal cabinet width is not the same as the internal drawer dimensions.

Installation

Place the insert inside the drawer and check the fit. If necessary, trim the outer margin evenly to the required dimensions. Take care not to damage the compartments or reinforced edges while trimming.

Care instructions

Clean the insert with a soft damp cloth and a neutral cleaning product. Avoid abrasive cleaning agents and rough cleaning tools that may damage the surface.